Can be exposed to the rain and marine spray. Waterproof. Made with an internal barrier conical membrane that lets sound and light out, but prevents water intrusion. IP65. Three seal construction.
Attention getting warning indicator alarm 100 db with 4 ultra bright flashing LEDs . When activated, one second on and off beep tone and LED. Place this alarm in parallel with any 12 volt warning light to be notified when there is a problem.
Used for outside dashboard or operating panels. Can withstand exposure to rain. #AL1WP
For Engine start, bilge alarms, Engine over heating, sump pump activation and low oil pressure.
Use with Boats, RV, Motorcycle, trucks, cars ATVs, snowmobiles, marine
Matches our standard line of 12 volt accessory or lighter sockets, USB charger sockets, switches and voltmeter. Used for custom dashboard or operating panels. With operate on DC 12 volts. #AL1WP
This is a listing for one panel dashboard mounted socket alarm and warning indicator. When 12 volts is applied the piercing tonal alarm and bright dual LED flash on and off in a one second interval cycle. The housing is nylon and can be mounted in panels of unlimited thickness. The connections are two male 0.250 nylon insulated disconnect spade terminals on a wire 16 gauge pigtail. The leads are non-polarized and will work with 12 volts AC or DC.
-Waterproof IP65
-Working Voltage: DC/AC 12 Volts +/- 20%
-Non-polarized connections.
-Anti-shock capability.
-Mounting Hole: 1-1/8" Panels of up to 1-1/2" thick with backing nut. Or panels of unlimited thickness with the mounting plate and screws.
-Continuous Working Life 30000h
-Sound volume: 100 db @10cm
-Sound type: intermittent one second on/off
-LED Brightness: 6000 MCD 4 LED
-Working Current: 20mA
-Connections male 0.250 fully insulated spade terminals.
We also make a similar version of this alarm 80 db / 2 LED that is not IP rated, search #AL1.
You might also like
