Water Resistant Tonal Signal Alarm Blue flashing LED 12V Socket Dashboard Panel #Al1B

Regular price $14.95

Tax included.

Mounts in panel of unlimited thickness. Blue flashing LED

Attention getting warning indicator alarm with flashing sight and sound. When activated, one second on and off beep beep action. Put this alarm in parallel with any 12 volt warning light to be notified when there is a problem. 

Used for custom dashboard or operating panels. With operate on AC or DC 12 volts. #AL1B

For bilge alarms, Engine over heating, sump pump activation and low oil pressure.

Use with Boats, RV, Motorcycle, trucks, cars ATVs, snowmobiles, marine

Notifier sonalert type.

Matches our standard line of 12 volt accessory  or lighter sockets, USB charger sockets, switches and voltmeter. Used for custom dashboard or operating panels. With operate on DC 12 volts.                                                           #AL1B

This is a listing for one panel dashboard mounted socket alarm and warning indicator. When 12 volts is applied the piercing tonal alarm and bright dual blue LED flash on and off in a one second interval cycle. The housing is nylon and can be mounted in panels of unlimited thickness. The connections are two male 0.250 nylon insulated disconnect spade terminals on a wire 16 gauge pigtail. The leads are non-polarized and will work with 12 volts AC or DC.

-Working Voltage: DC/AC 12 Volts +/- 20%

-Non-polarized connections. 

-Anti-shock capability.

-Mounting Hole: 1-1/8" Panels of up to 1-1/2" thick with backing nut. Or panels of unlimited thickness with the mounting plate and screws. 

-Continuous Working Life ≥30000h 

-Sound volume: 80db 

-Sound type: intermittent one second on/off 

-LED Brightness:≥500cd 

-Working Current:≤20mA

-Connections male 0.250 fully insulated spade terminals. Alarm options:

-Buzzer Type: Piezoelectric

-Frequency: 3900: ±500Hz

-Color: Blue