Let's you know if your battery bank is discharged and requires charging.
Avoid dead battery due to power source failure, charger failure or end of life battery. Lets you know when battery must be charged or changed. #BA2-3/8
Let's you know when your battery must be recharged. Easy to install and splash resistant.
For all kinds of motorcycle batteries- Lead Acid, Gel Cell, AGM.
Deep cycle battery terminal 3/8" Ring terminals. Also available with 3/4" automotive type ring terminals or 1/4" Motorcycle battery ring terminals.
Ideal for bikes that are in storage or with any small 12 volt battery being stored for a prolonged period.
Use this along with your battery charger. If power is lost to the charger for a long period of time the alarm will sound.
This device goes across your battery and attaches to the battery terminal on a 36" fused cable. If your battery gets discharged below 12 volts ( adjustable 10-14 volts) the alarm will sound and a red LED will glow. This allows you to know when you must begin recharging your battery before the discharge becomes excessive and permanent loss of battery life occurs. This model has automotive style battery lug ring terminals. Comes with 3/8" deep cycle battery ring terminal.
Also usable with batteries for ATVs, Snowmobiles, Lawn Mowers, Snow blowers and emergency generator starting batteries.
This listing is for one (1) battery monitor with alarm and LED. Has a 36 inch fused harness that attaches to deep cycle style battery 3/8" ring terminals. Place the ring terminals on the lugs. When the battery voltage drops below 12 volts the alarm and LED will be active. The alarm is a 80 db tonal alarm at 3000 hz. The monitor will operate down to 8 volts. Do not exceed 16 volts operation.