SAE Voltmeter Monitor. #CVMR+saep+sbpn/fpmnt.
Surface mount over or under. Or Panel mount
Can show you the sate of your battery. Check to see if your SAE cables are active.
Plugs into your SAE cable network to monitor the state of your battery. The caped SAE connectors are on a 16 gauge 6" wire . The voltmeter has a rubber terminal cover. The meter is set up to be plugged into a active SAE cable attached to your battery and monitors your battery. The meter can be used freestanding or mounted in panel.
This is a high quality voltmeter for checking the state of your battery and battery charger. The state of your battery between full charged and discharged. Can indicate a poor or bad charging system. Tells whether your battery is holding a charge or not. Tells whether your SAE cable is active.
The meter has easy to read red LED segments ( blue available upon request) and connect to your 12 volt system. The socket body is made out of heavy nylon. The meter can also be mounted in a panel hole of 1-1/8". The meter draws nominally 10 ma. and the range is 5-35 vdc. Other mounts are available at our store.