New lighter socket with hot pop out lighter plug. Can also be used for accessory plugs. #T/Cplg
Assembled and shipped from the USA
This socket can be used for both lighting cigarette or for accessories such as GPS, 12 volt chargers or iPods. Works with all lighter plugs and all 12 volt style accessory plugs. Comes with the lighter socket plug shown.
This listing is for one lighter socket and plug. Each socket is made of a heavy nylon UV resistant body and a nickel plated core. A vinyl opening cap inserts into the core and snaps over the socket rim to produce a waterproof seal. The socket works with all pop out style lighter plugs or with standard accessory plugs. Internal prongs hold the plug for better vibration resistance. The terminals are male 0.250 or 6mm style crimp terminals. The socket mounts into a 1-1/8" hole. It is rated a 15 amps at 12 volts. Socket length from flange to the end of the terminals is 2.0". Patent Pending by 12vtechnology.
Two ways to mount this socket. It can be mounted against a panel that is up to 1-1/2" thick by using the socket nut supplied. The nut tightens on the socket body to secure the socket to the panel. Or it can be mounted to even thicker panels by using the compression plate with two screws. The plate goes over the front of the socket flange and the two screw press the socket up against the panel from the front.
The lighter plugs shown is a pop out kind, nickel plated. Operates on 12 volts at 5 amps when plunged into the socket.