Heavy duty high current 25 amp socket for 12 volt accessory plugs ( lighter style) with waterproof front face and rubber contact terminal boot. #JD+#
Assembled and shipped from the USA
Good for defrosters, car heaters, seat warmer, coffee makers, heated gloves or jacket, etc.
Rubber washer acts as a locking washer to prevent the nut from coming loose in high vibration installations.
This socket can be used for all 12 volt accessories such as GPS, 12 volt chargers or iPods but also works with 12 volt appliances. Works with all 12 volt
style accessory plugs. (The plug shown is not included in this listing).
This listing is for heavy duty socket which has a heavy nylon UV resistant body and a nickel plated core and brass terminals with ceramic insulator. A vinyl opening cap
inserts into the core and covers the socket rim to produce a waterproof seal. Also included is a rubber mounting washer that makes the assembly more vibration
resistant and waterproof. A rubber terminal boot slides over the back to protect the connections from exposure. The socket works with all standard accessory plugs. The internal socket core is smooth for accessory plug, will not work
for hot lighter use. The brass terminals are male 0.250 or 6mm style crimp terminals. The socket mounts into a 1-1/8" hole. It is rated a 25 amps at 12 volts.
Socket length from flange to the end of the terminals is 2.0". Patent Pending by 12vtechnology.
Two ways to mount this socket. It can be mounted against a panel that is up to 1-1/2" thick by using the socket nut supplied. The nut tightens on the socket body to secure the socket to the panel. Or it can be mounted to even thicker panels by using the compression plate with two screws. The plate goes over the front of the socket flange and the two screw press the socket up against the panel from the front.
The 25 amp plug shown is not included in this listing.
This socket is for accessories and not for hot cigarette lighter use.