Extra long wire cord line float switch, 14 feet, with stainless steel mount and hardware. Three mounting options:
1.The float switch can be mounted to a Sump Pump Discharge Pipe with the supplied strap.
2. Screw mounted to a side surface at a desired height.
3. Clip mounted to a an edge up to 0.10" thick.
4. Through surface mount / tank top with a 10mm hole.
The kit includes 14 foot wire. float switch with sealed wire to switch connection allowing for switch submersion, stainless steel mount and two screws and a thick nylon tie strap for pipe mounting. #swflt2
The switch may actuate a pump relay, or indicator an alarm. It is rated for at 12 Volts DC at 18 watts. It can be easily converted from normally open contacts to normally closed by reversing the float on the switch shaft.
Max. Contact Rating: 18W Max.
Switching Voltage: 12 Volts DC
Max. Switching Current: 1.5A
Temperature Rating: -10 ~ +85 ℃
Float Ball Material: PP
Float Body Material: PP+GF
Screw Nut Material: PP+GF
E-Ring Material: PP
Use them with hydroponics, saltwater tank, bait well, water tank, gardening pond, Hot water heater leak wells, aquariums, pet bowls, bait tanks, Boat lockers filtration, heating, pumps, ponds, basement alarms, boats, air condition, drain pans, pressure washers, carpet cleaning machines, fluid control, ice machines, coffee pots, marine, evaporator coils condensation tanks, etc.