Triple USB Charger + Blue Voltmeter +Blue Switch Panel Marine Outlet w/ Jumpers #QCN8/SWB1/CV/CYKD/Qplt/4sq

Regular price $22.95

Tax included.

This listing is for a voltmeter, dual USB charger, iluminated blue SPST switch, triple mounting plate, mounting screws and a daisy chain interconnect jumper. #QCN8/SWB1/CV/CYKD/Qplt/4sq

Ships from the USA.



Splash proof front and back.

-Blue Illuminated Waterproof Rocker Switch –SPST

-Nylon threaded switch housing mount in a 1-1/8" hole. Can be mounted in panels or dashboards up to 1-1/4" thick with the retaining nut and in panels of unlimited thickness with the mounting plate.

-12 volt operation: Rated for 16 amps at 12 volts.

- IP rating 63

-Has male Ľ" crimp style disconnect terminals.illumination is low intensity for easier night vision.

-Three wire connection:

Black / Green wire goes to negative 12 volt power source.

Yellow wire goes to one side of the load being switched.

-Red /Brown wire goes the positive side of the load being switched.

- Repairable replaceable switch. Can be removed from the housing front.

-Other colors available at our other listings.

Dual USB Charger
Comes with front cap and heavy duty construction.

Blue LED power on indicator, UV Nylon Body.

Suitable for interior or exterior use.
Suitable for charging GPS, IPhone, IPod, Mobile Phones and other digital devices
2 port USB Socket
Waterproof Design
Power Input: DC 12V-24V

Output: 5V 2.8A DC(Total
Waterproof USB Cap

DC Voltmeter
Blue Display: segment LED digital tube, lamp display is blue.
Monitors the state of your battery between full charged and discharged
Can indicate a poor or bad charging system. Tells whether your battery is holding a charge or not
The meter has easy to read LED segments and connect to your 12 volt system.

The meter draws nominally 10 ma. and the range is 0-35 vdc

The daisy chain jumper allows you to connect up all three devices and make one connection to your 12 volt source.

The triple plate

The three devices mount in individual 1-1/8" holes, in panels of unlimited thickness, an optional nylon retaining nut can be used to holds the devices in place on panels of less than 1-1/2" thick. See Drilling template for mounting dimensions.

The mounting plate fits over the front of the devices to hold them against panel or dashboard. Held in place by four black screws included.