Solar Application, Battery monitoring.
This is a listing for one combination voltmeter and 12 volt socket and daisy chain jumper wires allow you to connect up the elements to the fused wire harness which connects to your power source. Alos includes a mounting plate, screws and rubber mounting washers. The material are of high quality and can be used for outside operation. #ycn8/cvmb/cr/tplt/4#/b36
The socket is marine grade and is weather and UV resistant. The cap seals the front of the socket. The body is heavy duty. The contacts are nickel plated. The socket is vibration resistant. It requires an 1 1/8" hole for mounting and has .250 quick male spade type quick connectors. Rated for 15 amps at 12 volts. Weight 1oz. Draws no power when not in use so it can't run down your battery.
The meter has easy to read Blue LED segments ( red available upon request) and connect to your 12 volt system. Comes with a rubber sealing washer/ spacer. and female terminals. The meter body is made out of heavy nylon. The meter draws nominally 10 ma. and the range is 0-30 VDC.
The charger and voltmeter fits in a 1-1/8" holes in panels up to 1-1/2 inch thick with just the backing nut and in panels of unlimited thickness by placing the rectangular compression plate over the front of the two and securing it with two screws.
The daisy chain jumper wire connect the components and the 36" harness include waterproof fuse holder and 15 amp fuse connects to your battery.
Higher volume discounts available for 10 or more contact us.