Highest quality waterproof four wire/pin polarized connector that can be mounted in a panel of any thickness. Rubber seals on all connections and mount. Includes rubber wire Boot to protect the wire connections. Protected front and back. IP66 Rated. #CN2/SBPN
Used for marine applications, solar panel connections and weather exposed connections.
Polarization allows for a safe positive and negative connection that can't be crossed. Pin are marked with a 1 and 2 for Plus (+) and Minus (-) respectively.
This listing is for one two part waterproof panel connector assembly for 12 volts. The female connector portion can be mounted in a panel of any thickness. A tethered cap encloses the connector when not in use. The male portion attaches to the application cable. A packing nut on the back of male portion seals off the wire cable. For wires cables up to 1/2" thick. The two connector parts, plug and socket, attach together with screw coupling with rubber seals. The female panel connector body when mounted in the panel is waterproof with the rubber sealing washer. The rubber wire boot covers the connections. Both plug and female socket have pin locations marked. Four color coded 16 AWG wires each 6 inches from the female socket, correspond to the four pin locations on the connector:
Solder connections on the male connector, wire size 16 AWG typical, Rated for 15 amps at 12 volts. Mounts in hole of 1-1/8". Can mount in a panel 1-1/4" thick with just the backing nut. The compression rectangular mounting plate allows the connector to be mounted in a panel or dashboard of any thickness.