Prevents dead batteries, Measure the state of charge of your battery and gives a loud alarm and LED indicator when maximum discharge occurs.- Freestanding mount over or under dash. #CBA7A/CMB1/2/HRN36
Comes with fused cable to attach to your battery
The Alarm will sound if your battery becomes discharged to the level at which it must be charged.
Avoid dead battery due prolonged use, long term storage, due to power failure, charger failure. Lets you know when battery must be charged. #BA7/cmb1/2sq/b36
Works with all kinds of 12 volt batteries.
For all kinds of storage batteries- Lead Acid, Gel Cell, AGM.
Ideal for vehicles that are in storage or with any 12 volt battery being stored for a prolonged period.
Use this with your battery charger to alert you to a power failure. This will tell you when your battery or battery bank must be charged.
This device is connected to your battery and attaches to the battery terminal with a 36 inch fused cable. If your battery gets discharged below 12.0 volts Level factory adjustable upon request) the 80db loud alarm will sound and a red LED will glow. This allows you to know when you must begin recharging your battery before the discharge becomes excessive and permanent loss of battery life occurs.
Ideal for Motorcycles, Cars in storage, Snowmobiles, ATV, Boat batteries, Generator starting batteries, RV battery banks, Sump pumps, well pumps, sewage discharge pumps and bilge pumps.
This listing is for one (1) battery monitor with alarm and LED, rubber mounting washer and 60" fused cable. Has a fused harness that attaches to the alarm with female crimp terminals and attaches to the battery terminal lugs with ring connectors.. When the battery voltage drops below 12.0 volts the alarm and LED will be active. The alarm is a 80 db tonal alarm at 3000 hz. Operate down to 8 volts and up to 15 volts. Do not exceed 16 volts.
Case is 2" x 2" x 3". Comes with two mounting screws