This listing is for a voltmeter, Heavy duty 4.2 Amp dual USB charger, 12 volt cigarette lighter socket, Pop out lighter plug, Accessory 12 volt socket with a quad mounting plate and mounting screws. Also includes connecting wires for a fast installation. 3ycn/CT/CVMB/CW/CR/Fplt/4sq/cplg
Ships from the USA.
Marine Grade 12 Volt Power Accessory Socket
For Motorbike Car/Boat/ATV/UTV/Camper/Caravans/ Travel Trailer etc
Specifically designed for marine and motorcycle applications
UV stabilized nylon housing with rubber splash proof tight fitting front cap
2 pole nickel plated brass terminal connectors. 0.250 male spade type.
Twist-and-Lock locking socket, allows a suitable power plug (not included) to lock into place. Works wth all 12 volt accessory plugs.
Rated for 15 amps at 12 volts peak 20 amps. draws no power when not in uses.
Cigarette Lighter 12 Volt Power Socket
Specifically designed for marine and automotive applications.
UV stabilized glass-fiber reinforced nylon housing with rubber splash proof cover.
Heavy duty power, rated for 20 amps at 12 volts. Works with all 12 volt lighter style accessory plugs plus standard pop out lighter plugs. The socket has internal prongs to keep the plug in place during high vibration operation.
Pop out lighter gets hot in 30 seconds, draws 6 amps max.
Dual USB Charger
Comes with front cap and heavy duty construction.
UV Nylon Body.
Suitable for interior or exterior use.
Suitable for charging GPS, IPhone, IPod, Mobile Phones and other digital devices
2 port USB Socket
Power Input: DC 12V-24V
USB Socket I Power Output:DC 5V 2.1A
USB Socket II Power Output: DC 5V 2.1A
Output: 5V 4.2A DC(Total)
Waterproof USB Cap
Display: segment LED digital tube, lamp display in blue, red available upon request.
Monitors the state of your battery between full charged and discharged
Can indicate a poor or bad charging system. Tells whether your battery is holding a charge or not
The meter has easy to read LED segments and connect to your 12 volt system.
The meter draws nominally 10 ma. and the range is 0-35 vdc
The quad plate
The four devices mount in individual 1-1/8" holes, in panels of unlimited thickness, an optional nylon retaining nut can be used to holds the devices in place on panels of less than 1-1/2" thick. See Drilling template for mounting dimensions.
The mounting plate fits over the front of the devices to hold them against panel or dashboard. Held in place by four black screws included.