Heavy duty high current lighter socket and plug wall mount plate. #CTD-/pwmnt/dplg
Asembled and shipped from the USA
Good for 12 volt appliances up to 20 amps refrigerators, heaters, coffee makers, etc.
This socket can be used for both lighting cigarette or for accessories such as GPS, 12 volt chargers or iPods. Works with all lighter plugs and all 12 volt style accessory plugs. The plug shown is a 20 amp heavy duty plug. The wall mount is a standard electrical
utility box face plate in black nylon, pre-drilled that accepts the socket shown. The mounting hole spacing is standard fro a North American utility box about 3.5" or 90mm, screws included. Will work with North American, Australian and New Zealand electrical utility boxes.
This listing is for one heavy duty 12 volt socket, wall mount and high power duty male plug. The socket has a rugged UV resistant body and a nickel plated core and brass nickel terminals.. A vinyl opening cap inserts into the core and snaps over the socket rim to produce a waterproof seal. The socket works with all pop out style lighter plugs or with standard accessory plugs. Internal prongs hold the plug for improved vibration resistance. The terminals are male 0.250 or 6mm style crimp terminals. The socket mounts into a 1-1/8" hole of the wall plate It is rated a 20 amps at 12 volts. Socket length from flange to the end of the terminals is 2.0".
Why is this a true 20 amp plug?
1. The negative contacts are elongated to allow for maximum surface contact needed for a true 20 amp plug.
2. The fuse spring, that is internal to the plug, is extra heavy duty to allow for 20 amps.
3. All the contacts are gold plated for maximum conductivity.
4. Large diameter wire opening.
The plug has an internal replaceable fuse and with a red LED active power indicator light. The contacts are extra heavy gold plated and nickel plated brass. Comes with rubber grommet for small diameter wire.