Highest Power, Integrated one piece construction, true 4.8 amp dual USB charging socket, rubber sealing washer, and heavy weather sealing cap.
Rubber washer acts as a locking washer to prevent the nut from coming loose in high vibration installations.
Ships from the USA.
Charges two iPods or two iPhones at the same time at full power.
This listing is for one USB dual charger socket with weatherproof cap. Attaches to your 12 volt source and allows you to charge USB accessories. #CPA/SW
What is a true 4.8 Amps?
Many charger are nominally rated or not rated at all. Other charging socket output 1, 2.1, 3.1 Amps, but these rating may only represent the maximum peak output rating and can not sustain that output for a prolonged period. Our chargers, including this one, at 4.8amps, are true rated which means they can maintain the rated output current for an indefinite period. This allows you to charge your USB accessories at maximum power. This charger's output is the highest in the industry. Each of the dual port can output a true 2.4 amps. Should your device require more than 2.4 amps the power is distributed as need to the individual ports up to 4.8 amps.
The socket body and charger are one piece, designed for outside use. The heavy weatherproof cap fits into and over the front of the charger to keep moisture out when not in use. This cap, unlike other caps, covers all of the individual USB port openings. The rubber washer provide a waterproof seal when panel mounting. The socket has 0.250 male spade type terminals for easy wire connections.
No LED, means lower power consumption.
This charger is rated for 4.8 amps at 5 V and can accept two USB devices. Unlike less expensive charger / adapters, this charger use built in integrated semiconductor technology to produce a constant 5 Volts DC This constant voltage source is important for operating and charging the batteries of your accessories, from a 12 volt source.
The socket fits in a 1-1/8" hole in panels up to 1-1/4 inch thick with the backing nut. Mounting plates available for thicker panels