SHIPS From the USA
This is a listing for one combination voltmeter, dual USB charger, daisy chain jumper wires and a fused harness. The material are of high quality and can be used for outside operation. # ycn8/cvmr/cu/tplt/4#
USB Charger:
Over-current over-voltage, over-load and over-temperature protection.
The intelligent control will prolong the cycle life of the battery.
Environmentally friendly, energy-saving, complying with the safe certification standard.
High working efficiency: over 85%, good charging performance.
Rapid charging your phone safely and without overcharging your battery.
Replaces Blue Sea Systems equivalent.
Parameters:
1: Input : 12V
2: Output : 5V---3.1A
3: Rapid charging for mobile phone
4: IC chip inside prevents overcharging and short circuit
Voltmeter:
The meter has easy to read red LED segments and connect to your 12 volt system. Comes with a rubber sealing washer/ spacer. and female terminals. The meter body is made out of heavy nylon. The meter draws nominally 10 ma. and the range is 0-30 VDC.
The charger and voltmeter fits in a 1-1/8" holes in panels up to 1-1/2 inch thick with just the backing nut and in panels of unlimited thickness by placing the rectangular compression plate over the front of the two and securing it with two screws. The two holes are side by side on 1-3/4" centers. The plate dimensions are 4.0" x 1.75" The mounting screw hole pattern is on I" centers for the two holes on the short side, and on 3-3/8" centers for the two holes on the long side.
Harness and daisy chain jumper
The daisy chain jumper connects the voltmeter and charger together. The fused harness connects to the daisy chain jumper and to your battery or 12 volt source. The harness has waterproof fuse holder with a 15 amp fuse.
You might also like
