Dual USB Charger + Blue Voltmeter + Power LED Switch w/ Wires 12V Marine Outlet #YCN8/SWB3/CV/CYBD/Qplt/4sq/a60

Regular price $21.95

Tax included.

The switch allows you to turn on and off the panel so it will not draw down your battery when not in use. When the switch is off no power is being used. Will not drain your battery. #YCN8/SWB3/CV/CYBD/Qplt/4sq/a60

This listing is for a voltmeter, dual USB charger, blue illuminated switch, daisy chain interconnect jumper wires, triple mounting plate with mounting screws, and a fused 60 inch battery harness.

Ships from the USA.

Waterproof blue LED switch Patent Pending
Blue Illuminated Waterproof Rocker Switch –SPST

-12 volt operation: Rated for 16 amps at 12 volts.

- IP rating 63

-Has Ľ" crimp style disconnect terminals to allow connections to the voltmeter and USB charger.

-Illumination is low intensity for easier night vision.

Dual USB Charger
Comes with front cap and heavy duty construction.

Suitable for interior or exterior use.
Suitable for charging GPS, iPhone, iPod, Mobile Phones and other digital devices
2 port USB Socket
Waterproof Design
Power Input: DC 12V-24V

Output: 5V 3.1A DC(Total
Waterproof USB Cap

DC Voltmeter
Blue Display: segment LED digital tube, lamp display is blue.
Monitors the state of your battery between full charged and discharged
Can indicate a poor or bad charging system. Tells whether your battery is holding a charge or not
The meter has easy to read LED segments and connect to your 12 volt system.

The meter draws nominally 10 ma. and the range is 0-35 vdc

The daisy chain jumper allows you to connect up all three devices and make one connection to your 12 volt source. Also included is a battery wire harness that connects to the panel and connects to your battery. Waterproof 15 amp fuse holder built in.

The triple plate

The three devices mount in individual 1-1/8" holes, in panels of unlimited thickness, an optional nylon retaining nut can be used to holds the devices in place on panels of less than 1-1/2" thick. See Drilling template for mounting dimensions.

The mounting plate fits over the front of the devices to hold them against panel or dashboard. Held in place by four black screws included.