Snap over cap, and now 3.1 amps.
This is a listing for one 12 volt socket and 3.1 amp dual USB charger combination. Comes with Mounting washers and a jumper cable that allows you to make one connection to both. The material are of high quality and can be used for outside operation. No LED to draw down your battery. #ycn8/cr/cybd/tplt/4#
The charger body is a heavy nylon with all nickel plated parts. The weatherproof cap fits into and over the front of the charger to keep moisture out when not in use. The charger has 0.250 male spade type terminals for easy wire connections.
No LED and a tight fitting sealing cap superior to other USB charger sockets because the cap snaps over the assembly.
This charger is rated for 3.1 amps at 5 vdc and can accept two USB devices. The charger use built in integrated semiconductor technology to produce a constant 5 Volts DC This constant voltage source is important for operating and charging the batteries of your accessories, from a 12 (11-14) volt source.
12 Volt Socket:
The socket is marine grade and is weather and UV resistant. The contacts are nickel plated and the socket body is heavy duty.
Comes with mounting washers for a more waterproof mount. Both socket and charger require an 1 1/8" holes for mounting and has .250 quick spade type male connectors. They mount against a panel with the retaining nuts on panels up to 1-1/4" thick. For thicker panels use the mounting plate. The socket for 15 amps at 12 volts. Draws no power when not in use, so it can't run down your battery.
Works with any standard cigarette lighter style plug.
Not for hot lighter use.
This is an 8 inch 16 gauge jumper with .250 crimp connectors to allow both the socket and charger to be connected together with one connection to you harness.