Dual charger 3.1 amps, with watertight front cap, 12 volt marine grade socket and twin handlebar mount. Comes terminal boot with jumper wire and 60" fused harness that attaches to your battery.
Ships from the USA.
This listing is for one twin mount, one USB dual 3.1 amp charger, 12 volt power outlet jack and attachment wires.
Attaches to your 12 volt source, allows you to charge USB and 12 volt accessories. iPhones 4-6S, iPads, GPS, #CU/CR/TMNT/ycn8/ahrn60-2sb
Marine Grade Socket:
The accessory socket is marine grade and is weather and UV resistant. The cap seals the front of the socket, should water get in, the socket is self bailing. The body is nylon plastic for strength and light weight. The contacts are nickel plated over brass. The socket is vibration resistant, unlike less expensive versions. It requires an 1 1/8" hole for mounting and has .250 quick male spade type quick connectors. Rated for 15 amps at 12 volts. This socket draws no power when not in use so it can't run your battery down.
Works with any standard cigarette lighter style plug or lockable marine plug. A locking plug looks like a regular male lighter plug but when twisted in this socket can not be pulled out easily, unless twisted again. Not for hot lighter use.
The dual mount can attach to a 3/4", 7/8" and 1" rail or handlebars. The mount is black UV resistant nylon and attaches to the handlebars or rail with a rail clamp and four screws.
The USB Chargers:
Each of the 3.1 amp USB charging sockets have an all in one integrated design. Has two ports one charging at 2.1 amp and one charging at 1 amp. A tight fitting cap protects the USB ports when not in use. All nylon construction and UV resistant.
Over-current over-voltage, over-load and over-temperature protection.
The intelligent control prolongs the life of the battery.
Environmentally friendly, energy-saving, complying with the safe certification standard.
High working efficiency: over 85%.
Rapid charging without overcharging your battery.
Has 1/4" male spade terminals.
Daisy chain jumper cable allows you to connect up both components and then make one connection to the 60'' Waterproof fused harness with 15 amp fuse. 1/4" ring terminals attach to your battery. Terminal boots cover the backs of the terminals for weather resistance.