This is a listing for one 12 volt socket and dual 3.1 amp USB charger combination. Comes with interconnection jumper wires, rubber mounting washers and a stone bore to drill the mounting holes. The material are of high quality and can be used for outside operation. #ycn8/cr/cu/tplt/4#/br1
The charger body is a heavy nylon with all nickel plated parts. The weatherproof cap fits into and over the front of the charger to keep moisture out when not in use. The charger has 0.250 male spade type terminals for easy wire connections.
This charger is rated for 3.1 amps at 5 volts and can accept two USB devices. The charger use built in integrated semiconductor technology to produce a constant 5 Volts DC This constant voltage source is important for operating and charging the batteries of your accessories, from a 12 volt source. Rapid charging, over voltage and short circuit protection.
12 Volt Socket:
The socket is marine grade and is weather and UV resistant. The contacts are nickel plated and the socket body is heavy nylon plastic. The socket is vibration resistant, unlike less expensive versions. The socket for 15 amps at 12 volts. Draws no power when not in use, so it can't run down your battery.
Works with any standard cigarette lighter plug or lockable marine plug. Check our other listings if you need a locking plug or a right angle mount. A locking plug looks like a regular male lighter plug but when twisted in this socket can not be pulled out easily, unless twisted again. It is weather resistant and vibration proof. Not for hot lighter use.
Each socket mounts in a 1-1/8" hole. See hole template above for more dimensions. A stone bore is included to produce the holes in plastic, wood or metal panels.