Waterproof bulkhead surface mount clam shell enclosure with Pulsating 80 DB alarm and Flashing LEDs. Option label tag. Comes with instructions.
Use this as an auxiliary alarm for bilge, engine warning light. Place it in parallel with other alrms or warning lights. Highly waterproof enclosure.
For bilge or compartment alarms
Label tag allows you to create a custom label. Label tag can be removed.
When 12 volts is applied the piercing tonal alarm and bright dual LED flash on and off in a one second interval cycle. The connections are two male 0.250 nylon insulated disconnect spade terminals on a wire 16 gauge pigtail. The leads are non-polarized and will work with 12 volts.
-Working Voltage: 12 Volts +/- 20% (24 volts available upon request)
-Continuous Working Life ≥30000h
-Sound volume: 80db
-Sound type: intermittent one second on/off
-Minimum Working Current:≤20ma
-Connections male 0.250 fully insulated spade terminals. Alarm options:
-Buzzer Type: Piezoelectric
-Frequency 3900: ±500Hz
The junction box with rubber o-ring seal is 3.0" x 2.5" x 2.5". The wire egress is a waterproof wire gland for up to 3/8" cable. Bulkhead mounts.