Attention getting warning indicator alarm with flashing sight and sound. When activated, one second on and off beep beep action. Put this alarm in parallel with any 12 volt warning light to be notified when there is a problem.
Used for custom dashboard or operating panels. With operate on AC/DC 24-32 DCvolts. #AL1-24
For bilge alarms, Engine overheating, sump pump activation and low oil pressure.
Use with Boats, RV, Motorcycle, trucks, cars ATVs, snowmobiles, marine
Notifier sonalert type
Matches our standard line of 12 volt accessory or lighter sockets, USB charger sockets, switches and voltmeter. Used for custom dashboard or operating panels. With operate on AC/DC 24-36 volts. #AL1-24
This is a listing for one panel dashboard mounted socket alarm and warning indicator. When 24 volts is applied the piercing tonal alarm and bright dual LED flash on and off in a one second interval cycle. The housing is nylon and can be mounted in panels of unlimited thickness. The connections are two male 0.250 nylon insulated disconnect spade terminals on a wire 16 gauge pigtail. The leads are non-polarized and will work with 24-36 volts AC/DC.
-Working Voltage: DC 24 Volts +/- 20% ( AC/DC)
-Mounting Hole: 1-1/8" Panels of up to 1-1/2" thick with backing nut. Or panels of unlimited thickness with the mounting plate and screws.
-Continuous Working Life ?30000h
-Sound volume: 80db
-Sound type: intermittent one second on/off
-Minimum Working Current:?20mA
-Connections male 0.250 fully insulated spade terminals. Alarm