Low Battery Detector prevents dead batteries- Panel mount.
Pre-wired panel with detector alarm and mute button includes 36 inch fused cable. The Alarm will sound if your battery becomes discharged to the level at which it must be charged. Low battery capacity. In addition to the tonal alarm a red LED will illuminate to indicate discharge state. Am illuminated mute button allows you to turn off the tonal portion of the alarm. The mute button and alarm LED will continue to glow.
Avoid dead battery due prolonged use, due to power failure, charger failure. Lets you know when battery must be charged. #BA8/b36
Works with all kinds of 12 volt batteries.
For all kinds of storage batteries- Lead Acid, Gel Cell, AGM.
Ideal for vehicles that are in storage or with any 12 volt battery being stored for a prolonged period.
Use this with your battery charger to alert you to a power failure. This will tell you when your battery or battery bank must be charged.
This device is connected to your battery via the included cable. If your battery gets discharged below 12 volts ( 50% discharge) the alarm will sound and a red LED will glow. This allows you to know when you must begin recharging your battery before the discharge becomes excessive and permanent loss of battery life occurs. To turn the alarm sound off press the mute button.
Ideal for Motorcycles, Cars in storage, Snowmobiles, ATV, Boat batteries, Generator starting batteries, RV battery banks, Sump pumps, well pumps, sewage discharge pumps and bilge pumps.
This listing is for one (1) battery monitor with alarm and mute button. Comes pre-wired, ready to install. When the battery voltage drops below 12.0 volts the tonal alarm and LED will be active. The alarm is a 80 db piezoelectric alarm at 3000 hz. Operate down to 8 volts and up to 15 volts. Do not exceed 16 volts.
Mounts in a hole 1-1/8" in panels up to 1-1/2" thick.