12 Volt / 24 Volt Triple 4.8A USB Charger + Red Voltmeter + Plug Socket Panel Wires fs15/qcn/cpab/cvmb/cr/q/4#

Regular price $2,495.00

Tax included.

This listing is for a voltmeter, dual heavy duty 4.8 amp USB charger, 12 or 24 volt accessory socket, triple mounting plate, mounting screws rubber mounting sealing washers and a daisy chain interconnect jumper. fs15/qcn/cpb/cvmr/cr/q/4#

Rubber washer acts as a locking washer to prevent the nut from coming loose in high vibration installations.

Ships from the USA.

Marine Grade 24 Volt Power Socket
For Motorbike Car/Boat/ATV/UTV/Camper/Caravans/ Travel Trailer etc
Specifically designed for marine and motorcycle applications
UV stabilized nylon housing with rubber splash proof tight fitting front cap
2 pole nickel plated brass terminal connectors. 0.250 male spade type.
Twist-and-Lock locking socket, allows a suitable power plug (not included) to lock into place. Works wth all 12 volt accessory plugs.
Rated for 10 amps at 24 volts. draws no power when not in uses.

Dual USB Charger
Comes with front cap and heavy duty construction.

Blue LED power on indicator UV Nylon Body.

Suitable for interior or exterior use.
Suitable for charging GPS, iPhone, iPod, Mobile Phones and other digital devices
Specification:
2 port USB Socket
Waterproof Design
Power Input: DC 12V-24V

Output: 5V 4.8A DC, 5.0A peak
Waterproof USB Cap

Rubber sealing washers make the assembly vibration resistant and waterproof mount.

DC Voltmeter
Red Display: segment LED digital tube, lamp display is blue.
Monitors the state of your battery between full charged and discharged
Can indicate a poor or bad charging system. Tells whether your battery is holding a charge or not
The meter has easy to read LED segments and connect to your 24 volt system.

The meter draws nominally 10 ma. and the range is 0-35 vdc

The two daisy chain jumper allows you to connect up all three devices and make one connection to your 24 volt source.

The triple plate

The three devices mount in individual 1-1/8" holes, in panels of unlimited thickness, an optional nylon retaining nut can be used to holds the devices in place on panels of less than 1-1/2" thick. See Drilling template for mounting dimensions.

The mounting plate fits over the front of the devices to hold them against panel or dashboard. Held in place by four black screws included.